|
Archives
Rail Station Retrofit Offers IAQ And Energy Savings
Extending the TD Banknorth Garden’s commuter foot traffic area 100 feet
into the adjacent train shed relieved congestion, however, it took innovative
HVAC engineering and architecture to make the retrofit an energy-saving and aesthetic
solution.
Previously, thousands of mass transit commuters were funneled into the cramped
congested lobby/walkway area of the Massachusetts Bay Transit Authority’s
(MBTA) renowned North Station terminal inside the TD Banknorth Garden, the
home of the NHL Boston Bruins and NBA Boston Celtics professional sports franchises.
The successful multi-million dollar expansion, developed and funded by Delaware
North Companies, Inc., the owner of the TD Banknorth Garden, now greets commuters
with a very energy-efficient indoor environment thanks to air curtains, proper
building pressurization, and an innovative, but aesthetic HVAC supply soffit
system.
Architects are using air curtains more in commercial building designs such as this retrofit of the TD Bankmorth commuter train station in Boston. The In-Ceiling Mount model allows the air curtain mechanical equipment to be recessed into a ceiling or soffit.
Previously, the MBTA’s narrow 30-foot-wide lobby/walkway area’s traffic
spilled over into the automatic entry door sensor zones, thus exterior sliding
double doors remained open continuously during rush hours resulting in significant
energy losses into the open-ended train shed. While the renovation’s
main objective was better traffic flow and a roomier waiting area, controlling
energy
losses through more efficient doorways was also a major concern.
“
We knew going into this project that one of the greatest challenges was saving
energy for the client because many doors would be constantly open from continuous
foot traffic,” said Jeffrey Fleishman, HVAC project engineer, Cosentini
Associates, Cambridge, Mass.
Air curtain specifications for commercial buildings is on the rise because they can eliminate the need for costly vestibules. In this TD Banknorth commuter rail station doorway retrofit, a Berner International In-Ceiling Mount air curtain allows the sliding doors to stay open during rush hours without losing conditioned air.
The design team’s solution to congestion relief was a build-out of the
lobby 100 feet into the 200-foot-long x 260-foot-wide train shed. In the re-design,
the existing 12 sliding commuter doors were moved out 100 feet and incorporated
into a new curtain wall. Designed by architect firm, Sasaki Associates, Inc.,
Boston, and built by the project’s general contractor, Tishman Construction
Corp., Boston, the innovative and aesthetic perimeter soffit aesthetically
caps the curtain wall and also functions as a concealment for the necessary
electric,
HVAC piping, ductwork, fire safety, and other utilities.
The soffits also became perfect receptacles for housing 12 high-efficiency
In-Ceiling Mount air curtains by Berner International, New Castle, PA. The
72-inch-wide
In-Ceiling Mounts complemented Sasaki Associates’ aesthetics for the new
entrance area because they’re completely recessed into the bottom of the
soffit and appear only as decorative white aluminium grills. Each 3,624-cfm air
door distributes a maximum 3,500-f/min. stream of air angled directly down toward
the floor, thus cold (or hot in the summer) train shed air and fumes can’t
infiltrate the receiving area.
The design team's solution to congestion relief was a build-out of the lobby 100 ft. into the 200-foot-long x 260-foot-wide train shed. In the re-design, the existing 12 sliding commuter doors were moved out 100 feet and incorporated into a new curtain wall.
“
Obviously energy savings and performance were important factors in choosing air
curtains, but equally important was the aesthetics,” said Fleishman, who
had previously specified air curtains only for industrial applications. “The
sliding doors can stay open for hours and very little train shed air infiltrates
the space due to the combination of air curtains and space pressurization.”
Cosentini utilized Berner’s factory-installed coil/filter combination options
offered on many of its models, thus the In-Ceiling Mount units all have hot water
coils that tap into the soffit’s heating supply loop. The 95,600-Btu/h
coils supplement the new entrance areas, when needed. The air curtais also include
Berner’s Comfort Plus Control Package, which includes a thermostat, three-speed
fan with easy maintenance access from an on-board control panel, a timer delay
function, and a low voltage relay for tapping compatibly into any direct digital
control (dDC) building automation system such as TD Banknorth Garden’s
BAS system by Siemen’s Building Technologies, Buffalo Grove, IL, if needed.
The control package offers TD Banknorth Garden two units for the price of one;
an air curtain performance/wind stopping unit when the door is open, plus a
cabinet heater or low velocity and low noise with high heat output when the
door is closed.
Exterior shot of TD Banknorth. (Photo courtesy of Delaware North Co., Inc., Boston)
Summer operation uses the air curtain’s recirculation mode. Wereas
most air curtain air inlet designs recirculate hot, humid air from above, an
In-Ceiling
Mount air inlet efficiently draws cooler tempered air from the floor area.
When the current TD Banknorth Garden arena replaced the former Boston Garden
building in 1995, a heating loop was installed to supply conventional cabinet
heaters, which were later cancelled because of the high equipment and operational
costs combined with the inefficiency of that technology in that application.
At a huge cost savings to the terminal retrofit, the Cosentini design team
tapped off of that existing heating loop to supply the air curtains. an Existing
Bryant
boiler and twin 40-hp pumps by Bell & Gossett, Morton Grove, IL, supplies
the loop. Cosentini also provided a performance study on the loop’s capacity
prior to construction.
The previous doorways were significant energy losers according to Fleishman’s
pre-construction energy observations. Conversely, keeping heat in and cold winter
weather out with air curtains in the new terminal area is saving the building
owner a significant amount of energy. Matt Freitas, sales engineer at manufacturer’s
representative Equipment Direct Sales, Randolph, Mass., provided sizing, energy
saving estimations, and design assistance for Cosentini on the air door portion
of the project.
To heat/cool the entire new space, the Cosentini design team specified a
14,900-cfm McQuay International, Minneapolis, MN, make-up air air handler that
was installed
by Walsh Mechanical, Abington, Mass., in the TD Banknorth Garden mechanical
room, which already had an outdoor air shaft for easy access. The HVAC system
installation’s
most difficult challenge was running the 200-foot long supply duct through
a congested mechanical room and down an aisle of ice rink compressors that
neede
service accessibility clearance.
Exposed metal ductwork with registers distributes heating or cooling down
the center of the new waiting area. the air handler is sized and designed to
heat/cool
the space to a design temperature of 72ºF with a 200-person capacity occupancy.
the air curtains’ heating function supplements the indoor air comfort.
While the train shed’s emergency ventilation system is designed with
positive pressure, the new receiving area has also been designed with positive
pressure.
This pressurization is an engineering challenge, according to Fleishman, because
there are no doors or barriers separating the new area from the rest of the
TD Banknorth building.
Because of aesthetic advancements in air curtain design and the Cosentini
design team’s attention to energy savings, the new mass transit rail station
at the TD Banknorth Garden is a functional, aesthetic facility that provides
commuters
with indoor air comfort as well as energy savings for its owners.
Archives
|